|
 |
 |
|
|
 |
|
 |
|
|
|
|
|
|
|
STRENGTH, DURABILITY & VERSATILITY |
|
Century 's Super Duty Industrial
Carriers with a load rating of
30,000 lbs. is designed to provide
you the capacity you need to handle
the heavy payloads and the strength
and durability to provide you with
years of trouble free service.
Century's Super Duty Industrial
Carriers are available with a wide
range of options, such as removable
side rails or a wood deck, for added
versatility.
Century's Super Duty Industrial
Carriers are capable of handling a
wide variety of loads such as
forklifts, tractors, machinery,
construction and agricultural
equipment.
And as in all of Century's products,
the Super Duty Industrial Carrier
has been engineered and tested to
conform to the same rigorous
standards that has made Century the
Legendary Leader in Towing and
Recovery Equipment.
|
|
|
CENTURY HEAVY DUTY 3 & 4 CAR CARRIER -
STANDARD EQUIPMENT |
|
Hydraulic Dock Stabilizers |
Lighted Dual Controls |
|
Tilt Lockout Controls |
Positive Lock Down System |
|
Drivers and Passenger Side Chain Trays |
12 Key Holes (4 per side, 4 across rear) |
|
Consolidated Tilt Frame and Mounting Frame |
Two Power Lift Cylinders |
|
One Extension Cylinder |
20,000 lbs. Planetary Winch with Cable |
|
Mud Flaps |
Air Winch Release |
|
Federal 108 Light Group |
Steel Tube Cab Protector |
|
Pump |
Painted in Black Acrylic Enamel |
|
All Components for Complete Installation |
|
|
CENTURY HEAVY DUTY 3 & 4 CAR CARRIER -
OPTIONAL EQUIPMENT |
|
PTO |
Air Shift PTO |
|
Tool Compartment with Locking Latch |
Four Piece Removable Side Rails |
|
102" Wide Deck |
Smooth Floor in Lieu of Diamond Plate |
|
Wrecker Special Light Bar |
Apitong Wood Floor |
|
Tie Down Chains |
Working Area Lighting |
|
Additional Key Slots |
1/4" Floor Deck in Smooth or Diamond Plate |
|
Winch Cable Tensioner |
Rub Rail with Outside Stake Pockets and Pipe
Spools |
|
Many other popular Century options |
|
|
CENTURY
HEAVY DUTY 3 & 4 CAR CARRIER
- BED SPECIFICATIONS |
|
Load Rating: |
30,000 lbs. * |
|
Platform Length: |
24', 26', 28' & 30' |
|
Platform Width: |
96" |
|
Platform Thickness: |
3/16" CKD Floor |
|
Platform Main Beams: |
8" I-Beam |
|
Platform Crossmembers: |
2" x 4" x 1/8" Tubes on 6" Centers |
|
Platform Sides: |
7" x 4" x 3/8" Angle w/24" c/c Pockets |
|
Rear Approach Plate: |
Wedge Tip |
|
Subframe: |
7" x 4" x 3/8" Tube |
|
Rear Pivot: |
1 Piece - 2" Diameter |
|
Winch: Rating (1st layer) |
20,000 lbs. Worm Gear |
|
Cable Diameter & Length: |
9/16" x 100' |
|
Power Lift Cylinders: |
5" x 32" Stroke |
|
Extension Cylinder: |
5" x 120" Stroke |
|
* The Ratings Specified are Based on
Structural Factors Only - Not Vehicle
Capability. Platform
Rating is Based on Equally
Distributed Load. |
|
CENTURY HEAVY DUTY 3 & 4 CAR CARRIER
- CHASSIS
RECOMMENDATIONS |
|
Tandem Axle Chassis |
|
Minimum G.V.W.R. (gross vehicle weight
rating) |
50,000 lbs |
|
Minimum C.B. (cab to bogie) dimension |
24'
26'
28'
30' |
142"
166"
190"
214" |
|
Minimum Frame R.B.M. (each rail) |
3 Million Inch lbs. |
|
Note: Specifications subject to change
without notice. All ratings specified are
based on structural factors only, not
vehicle capacities or capabilities.
|
