|
 |
 |
|
Back
to Product Line |
|
|
|
|
Century's Carrier . . .
So Superior It's In A
Class By Itself |
|
At Century we feel that "keeping up
with the industry" is nothing but an
excuse. If we can't produce a
product that is superior to
everything else in its class . . .
then you won't see our name on it.
Our Car Carriers are a perfect
case-in-point. They possess every
standard feature that you'd expect
from a world leader, brought
together in a sleek, attractive, and
sturdy package.
With an independent wheel-lift
system, positive lock-down, extra
low loading angle and easy one-man
operation . . . Century has driven
past every limitation that has ever
held "The Industry" in check.
It leaves no room for argument.
|
|
|
CENTURY 10 SERIES CARRIER - STANDARD
EQUIPMENT |
|
Safety Chains |
Right and Left Chain Trays |
|
Platform Available In Aluminum or Steel |
8,000 lb. Hydraulic Winch with 50' of Cable |
|
Front and Rear Tie-Down slots |
Bed Anti-Tilt Feature |
|
Full-Length Nylatron Slide Pads |
Century Mud Flaps |
|
Back-Up Alarm |
Two Lift cylinders |
|
Consolidated Tilt and Full-Length Mtg. Frame |
Adjustable Bed Lock-Down System |
|
One Extension Cylinder |
Back-Up Lights |
|
Left and Right Hand Illuminated Controls |
Winch Clutch Release |
|
Federal Standard 108 Lighting |
Wheel-Lift Safety Pin |
|
Pump |
Winch Guide Rollers |
|
Winch Cable Tensioner |
All Components for Complete Installation |
|
Pre-Assembled and Factory Tested |
Full Height Steel Headboard |
|
Hydraulic Independent Wheel-Lift System with
Slide-in L-Arm System |
Steel Beds Painted in Black Acrylic Enamel |
|
CENTURY 10 SERIES CARRIER - OPTIONAL
EQUIPMENT |
|
PTO |
Locking Tool Boxes |
|
Spotlights (Directional) |
Planetary Winch in lieu of Worm Gear Winch |
|
V-Chain Assembly |
Work Lights |
|
Wrecker Special Light |
Factory Installation |
|
Tie-Down Chain Assembly |
Trailer Ball Adaptor for Wheel-Lift |
|
Switch Panel |
3 Way Pivoting L-Arm System |
|
Stationary Cab Protector (requires 10"
additional C.A.) |
Removable Side Rails |
|
Following Options Available Only On The
Steel Platform |
|
Additional Cross Members |
Smooth Floor instead of Diamond Plate |
|
Optional Color on side Rails & Top of Deck |
Many other Popular Century Options |
|
CENTURY 10 SERIES CARRIER - WHEEL-LIFT
SPECIFICATIONS |
|
Lift Rating at Full Extension: |
3,000 lbs. *
(2,000 lbs. for 15,000 GVW) |
|
Tow Rating at Full Extension: |
6,250 lbs.*
(5,000 lbs. for 15,000 GVW) |
|
Retracted distance from rear of bed to rear
face of Crossbar |
2" |
|
Full extension distance from rear of bed to
rear face of Crossbar |
62" |
|
Lift Height off Ground - Full Retracted |
25" |
|
Lift Height off Ground - Full Extension |
33 1/8" |
|
CENTURY
10 SERIES CARRIER
- BED SPECIFICATIONS |
|
19',
19 1/2" and 21' Bed |
|
Load Rating: |
10,000 lbs. * |
|
Minimum Loading Angle: |
11° ** |
|
Maximum Bed Angle: |
15° |
|
Platform Thickness: |
3/16" Aluminum / Steel |
|
Platform Width: |
Inside Rails
Over All |
91 1/2"
95 1/2" |
|
Platform Extension: |
108" |
|
Controls: |
5 Spool Mono-Block Valve -
Left and Right Side Standard |
|
Winch: Rating (1st layer) |
8,000 lbs. |
|
Cable: |
Diameter & Length
Type
Working Limit |
3/8" Diameter x 50 ft.
6 x 19 IPS
3,500 lbs. |
|
* All Ratings Specified are Based on
Structural Factors Only - Not Vehicle
Capability.
Platform Rating is Based on Equally
Distributed Load.
** Minimum Load Angle Specified is for
Chassis Frame Height of 31 1/4" off Ground.
Approach Angle will Vary with Chassis
Height. |
|
CENTURY 10 SERIES CARRIER
- TRUCK
RECOMMENDATIONS |
|
Minimum G.V.W. |
15,000 lbs. |
|
Maximum G.V.W. |
25,500 lbs |
|
CENTURY 10 SERIES CARRIER
-
CAB TO AXLE |
|
19'
19 1/2'
21' |
118" / 122"
127"
144"
144" / 150" |
Domestic
Offshore
Domestic
Offshore |
|
Minimum Frame Length Behind Center
of Rear Axle - 35" |
|
Maximum Height from Ground to Top of
Frame Rail - 38.5" |
|
Note: Specifications subject to
change without notice. All ratings
specified are based on structural
factors only, not
vehicle capacities or
capabilities. |
|
