Hydraulic Auto Load

The Challenger Express brings hydraulic auto loads to a higher level with features that include extended reach for easy vision and hook-up, newly designed crossbar approach plate, a 3" pivot pin and a roller guided hose tracking system for less maintenance and downtime.  Check out the features and find out how the Challenger Express can help increase you profits, not your downtime.
The optional motorcycle attachment allows the operator to hook-up and haul motorcycles damage free.
The operator can lower and extend the wheel lift from inside the cab as he backs up to the vehicle.  With the arms in an open position, the crossbar contacts the front of the tires.  The operator now closes the arms around the tires and raises the vehicle without getting out of the truck.  (Always use safety straps and chains before towing.
The optional tow sling available on Challenger Express 4311 & 4312, can be utilized for hauling damaged vehicles or heavier loads.

CHALLENGER EXPRESS - STANDARD FEATURES

Integrated Boom & Wheel Lift System

Challenger Express Hydraulic Hookup

Clutch Pump

In-cab remote control pendant on cord with 4 functions

1 pair of safety straps

Safety Chains in Rear Pockets)

Tool Compartment, Left and Right Hand Side

86" Wide Heavy Duty Body

Wiring Harness with Junction Box

Federal Standard 108 Light Group

Back Up Alarm

Power Boom Elevation w/Holding Valve

Mud Flaps

Self Centering Crossbar with 3" Pivot Pin

Power Fold for Stinger Storage

All Components for Complete Installation

Dual Controls

Lubrication Fittings on all Shafts and Other Moving Parts

Roller Guided Hose Tracking System 

Preassembled and Tested

Challenger Express 4301

8,000 lb. Variable Speed Hydraulic Winch

3/8" x 75' Cable Assemblies

360° Directional Boom End Swivel

Challenger Express 4311

8,000 lb. Variable Speed Hydraulic Winch

3/8" x 75' Cable Assemblies

Hydraulic Extendable Recovery Boom

360° Directional Boom End Swivel

Challenger Express 4312

Dual 8,000 lb. Variable Speed Hydraulic Winches

(2) 3/8" x 75' Cable Assemblies

Hydraulic Extendable Recovery Boom

360° Directional Boom End Swivel

CHALLENGER EXPRESS - OPTIONAL EQUIPMENT

Tow Sling (4311 & 4312 only)

Switch Panel

Trailer Ball Adapter

Convenience Group

Light Pylon

Motorcycle Attachments

Work Lights

Wrecker Special Light Bar

24" Tunnel Tool Compartment for 84" C.A.

Front Push Bumper

Many other popular Challenger options

Cable Anti-Spooling Tensioner

CHALLENGER EXPRESS - SPECIFICATIONS 

Wheel Lift Rating

Lift Rating
Tow Rating

4,000 lbs.
7,500 lbs.

Wheel Lift Specifications

Retracted Distance from Tailgate At Normal Tow Position
Extended Distance from Tailgate At Normal Tow Position
Maximum Hydraulic Extension

41"
74 3/4"
33 3/4"

Wheel Lift Specifications

Challenger Express 4301, 4311, & 4312
Rating (first layer of drum) each winch

8,000 lbs.

Cable

Challenger Express 4301, 4311, & 4312
Diameter and Length (each winch)
Type

3/8" x 75'
6x19 Hemp Center, IPS

Boom Ratings

Challenger Express 4301Boom Specifications
At Boom Swivel (retracted)
Maximum Boom Elevation

16,000 lbs.
38°

Challenger Express 4311/4312 Boom Specifications
 
Lift height from ground to hook at max. boom elevation
Reach past tailgate at min. boom elevation
Reach past tailgate at max. boom elevation
Boom Rating at Boom Swivel

Retracted
  83 3/4"
    -----
    -----
16,000 lbs.

CHALLENGER EXPRESS - CHASSIS RECOMMENDATIONS

The Challenger Express should be installed on a chassis with a minimum GVW of 10,000 lbs. dual rear wheels and a minimum C.A. of 60".  A heavy-duty spring package is recommended.

Note: Specifications subject to change without notice.  All ratings specified are based on structural factors only,  not vehicle capacities or capabilities.