|
|
|
|
Our heavy-duty
towing and recovery vehicles continually
outshine our competitors' models. Each
heavy-duty Challenger unit provides the
reach and capacity needed for tough recovery
jobs -- but strength isn't our only
attribute. Our sleek body design and our
many unique, popular towing and recovery
options combine to make Challenger the
undisputed leader in heavy-duty towing and
recovery. |
|
CHALLENGER HEAVY-DUTY SERIES - STANDARD
FEATURES |
|
Fenderettes |
Safety Holding
Valves on All Cylinders |
|
Twin Hydraulic
Pumps |
Hydraulic Rear
Jack Legs with Multi-Position Spades |
|
Power Boom
Elevation |
Dual Outboard
Side-by-Side Elevation Cylinders |
|
Single Stage
Power Extension |
Lubrication
Fittings on All Moving Parts |
|
180" C.B.
Modular Body |
Air Clutch
Release on Winches |
|
Air Tensioners |
Mud Flaps |
|
Federal Standard
108 Light Group |
Wiring Harness
in Flexible Conduit |
|
Provision for
Truck Bar |
Safety Chains |
|
15" Sill
Channels |
Door Closures |
|
Rear Mounted
Recovery Anchors |
|
|
CHALLENGER HEAVY-DUTY SERIES - OPTIONAL
EQUIPMENT |
|
Tool Compartment
Lighting |
Rear Mounted
Drag Winch |
|
Steel Light
Pylon |
Chrome Handrails
and Boarding Steps |
|
Aerodynamic
Light Pylon |
Light Bar |
|
Work Lights |
Switch Panel |
|
Air Shift PTO |
Rear Mounted Air
and Seven-Way Plug |
|
Aluminum Package |
204" C.B.
Modular Body |
|
Snatch Blocks |
180" or 204" C.B.
Aluminum Modular Body |
|
Cable Wings |
Tri-Axle Body |
|
Many other
popular Challenger options |
|
|
CHALLENGER
HEAVY-DUTY SERIES
- SPECIFICATIONS
|
|
|
6807 |
8807
|
9907
|
|
BOOM
|
|
|
|
|
Basic
structural rating
Retracted
Extended |
80,000
lbs.
20,000 lbs. |
100,000
lbs.
34,000 lbs. |
140,000
lbs.
50,000 lbs. |
|
|
|
|
|
|
Reach
past tailgate
Retracted
Extended |
24"
180" |
24"
180" |
24"
180" |
|
|
|
|
|
|
Range of
elevation |
0° - 50° |
0° - 50° |
0° - 50° |
|
WINCH
|
|
|
|
|
Type
|
Planetary |
Planetary |
Planetary |
|
Capacity
per winch |
35,000
lbs. |
50,000
lbs. |
60,000
lbs. |
|
Cable
size |
3/4" x
200' |
3/4" x
250' |
7/8" x
250' |
|
Line
configuration |
dual |
dual |
dual |
|
OPTIONAL
UNDERLIFT SPECIFICATIONS - SDU-3 |
|
Lift
capacity (lbs.) Retracted
Extended
Tow Rating
Extended Reach Past Tailboard
Tilt Degrees Above
Below |
55,000
lbs.
17,000 lbs.
80,000 lbs.
135"
10°
10° |
|
|
CHALLENGER HEAVY-DUTY SERIES - CHASSIS
RECOMMENDATIONS |
|
|
6807 |
8807 |
9907 |
|
GVW |
52,000 lbs. |
60,000 lbs. |
72,000
lbs. |
|
R.B.M.
(in./lb.) (each rail) |
3,500,000 |
3,500,000 |
4,000,000 |
|
|
General Information:
A tandem axle chassis is recommended;
consult factory for more information.
Minimum frame
length behind center line of rear axle is
45". The outside frame rails of chassis
extending behind cab must be free of fuel
and
air tanks, battery boxes, etc.
|
|
Warning:
Do not exceed the boom or winch rating when
hoisting or recovering. Do not exceed
recommended working strength of cable
(consult factory) when planning your cable
rigging. Use
snatch blocks and multiple lines to keep
normal loads on cable.
*
With tandem axle. 1,000,000 in./lb. with
single axle. |
|
|
|
Note: Specifications subject to change
without notice. All ratings specified are
based on structural factors only, not
vehicle capacities or capabilities. |
