CarrierWrecker

 

Welcome to King Automotive & Industrial Online

Tampa, Florida, U.S.A.              Phone# 813-620-9151

Toll Free 888-668-KING

 

King Home Page Used Equipment Products

Parts & Accessories Add-On Wheel Lifts Location / Directions

Contact Us Credit Application

King Specials

 

Champion - Versatility . . . Strength . . . Reliability


Champion Aluminum and Steel Equipment Haulers    

 


Back to Product Line


VERSATILITY . . . STRENGTH . . . RELIABILITY . . .

  
With the growing increase in specialized cargo, Champion has developed a carrier to handle those particular needs.  The Champion Equipment Hauler is ideal for moving light rubber tire and track loaders, lawn and garden equipment and a wide variety of rental and construction machinery.

To stand up to the weather and load demands, the floor is constructed using Apitong wood to provide better durability than other hard woods.  The Apitong floor also provides for better traction when loading and less slippage after the load is secured as compared to steel floors.  To aid in the loading process of equipment from loading docks, The Champion Equipment Hauler comes standard with a hydraulic dock stabilizer.  If you need a proven reliable equipment hauler with the strength to transport a wide variety of loads, look to Champion.
  
                                                             Check out a Champion!
             See how this innovative and affordable car carrier can increase your profitability.

       

CHAMPION ALUMINUM & STEEL EQUIPMENT HAULERS
STANDARD FEATURES

Deck available in steel or aluminum with Apitong wood floor Federal standard 108 lights
Floor level sides with stake pockets Spring loaded winch release
Lighted dual controls Driver's side tool box with locking latch
Tilt lockout control Cable tensioner
8,000 lb. winch with 50' of 3/8" cable Cable roller guide
Full length Nylatron slide pads Hydraulic pump
Dual outboard holddown system Hydraulic dock stabilizer
Full height steel light pylon Preassembled and factory tested
Two power lift cylinders and one extension cylinder Steel carriers painted in black acrylic enamel
Driver and passenger side chain trays All components for complete installation
4 rear tie down slots 2 front safety chains
Champion mud flaps Back up alarm

          

CHAMPION ALUMINUM & STEEL EQUIPMENT HAULERS
OPTIONAL EQUIPMENT

Wrecker Special Light Bar 3,000 Independent wheel lift in lieu of dock stabilizer
Work area lighting Optional color on side rails (steel carrier)
Switch Panel 10,000 Planetary gear winch in lieu of worm gear winch
Additional tool box Remote control on winch
Tie down chains V-chain assembly
Tie down strap kit Polished aluminum light pylon in lieu of standard steel pylon
PTO  
Removable side rails:  available in steel or polished aluminum (not available on 21' aluminum)
Many Other Popular Champion Options

        

CHAMPION ALUMINUM & STEEL EQUIPMENT HAULERS
BED SPECIFICATIONS

Bed
Load Rating
     19', 19 1/2' and 21'
     10,000 lbs. *
Minimum Load Angle
Maximum Bed Angle
     11°  **
     15°
Wood Platform Thickness
Platform Width
Platform Extension
     5/4 Apitong
     Over All - 95 1/2"
     108"
Controls        5 Spool Mono-Block Valve
     Left and Right Side Standard
Winch:  Rating (First Layer)
   
Cable:   Diameter
             Length
             Type
             Working Limit
     8,000 lbs.
  
     3/8"
     50'
     6 x 19 IPS
     3,500 lbs.
*   The Ratings Specified are Based on Structural Factors Only-Not Vehicle Capability.  Platform
     Rating is Based on Equally Distributed Load.
** Minimum Load Angle Specified is for Chassis Frame Height of 38" off Ground.  Angle will
     Change with Chassis Frame Height.

        

CHAMPION ALUMINUM & STEEL EQUIPMENT HAULERS
TRUCK RECOMMENDATIONS

Minimum GVW:    17,500 lbs.
Maximum GVW:   25,500 lbs.
Cab To Axle
           19'             118"/122"             Domestic
           19' 1/2"             127"             Offshore
           21'
  
            144"
            144"/150"
            Domestic
            Offshore
Minimum Frame Length Behind Center of Rear Axle - 35"
Maximum Height from Ground to Top of Frame Rail - 38 1/2"

Note:  Specifications subject to change without notice.  All ratings specified are based on structural factors only, not vehicle capacities or capabilities.

 

King Automotive & Industrial Equipment

4902-A 16th Ave. So.
Tampa, FL 33619, USA

Tel 813-620-9151
Fax 813-247-5536

Toll Free 888-668-KING