Welcome to King Automotive & Industrial Online

Tampa, Florida, U.S.A.              Phone# 813-620-9151

Toll Free 888-668-KING

 

King Home Page Used Equipment Products

Parts & Accessories Add-On Wheel Lifts Location / Directions

Contact Us Credit Application

King Specials

 
 
  Series 10
 
 

Series 10 Carrier

   
      Features & Options

   

       Back to Products

 

 

Standard Equipment


• Aluminum or Steel Body

• Aluminum Body:
- Heavy duty extruded sill with integral full length graphite-impregnated wear strips top and bottom
- Front left and right chain trays
- Extruded double-box sides
- Rear sill reinforcements
- 6 chain locks

• Steel Body:
- 3/16 smooth floor
- front left and right chain trays
- 4 x 2 structural tube crossmembers 12 inches on center
- raised steel sides
- 6 chain locks
- black paint or prime

• Inboard or outboard titlt cylinders
• Fully hydraulic hitch or wheel lift
• Illuminated dual controls
• Body lock
• Mudflaps
• Federal standard 108 lighting
• Tow light plug
• Water resistant junction box for wire harness connection
• Lubrication fittings on all pivot points
• 8,000 lb. hydraulic winch with 3/8 x 50 ft. cable
• Pilot operated holding valves on tilting and lifting functions
• Back up alarm
• Cab protector with aluminum trim
• Aluminum tool box (33L x 18H x 18W)
• Direct mount pump
• Cable roller guide
• Winch free wheel extension
• Releasable L-arms
• Safety Chains
• Mechanical anti-tilt

 

Optional Equipment


• Stationary cab protector kit
• Aluminum tool box (49L x 16H x 18D)
• Factory installation
• PTO
• Engine mount clutch pump
• Steel body paint (other than black)
• Additional chain locks (steel only)
• 102 inch wide body - (steel only)
• 3/16 in. diamond plate floor (steel only)
• AutoGrip II™ wheel lift
• BackSaver™ wheel lift
• Removable side rails
• Floor level sides with stake pockets
• Floor level sides with rub rails
• 9,000 lb. planetary winch

 

Accessories

 • Bar light
• Work lights
• Switch panel
• Magnetic tow lights
• J-hook chains
• V-chain
• Trailer hitch

 

 

Chassis Recommendations


• Minimum GVWR - 11,000 lbs. - 17.5 transporter
• Minimum GVWR - 14,000 lbs. - hitch/wheel lift
• Maximum GVWR - 25,500
• Accessible PTO opening or engine mounted clutch pump
• Maximum frame height - 37 inches
• Minimum CA for wheel lift - 114 inches
• Minimum frame RBM each rail:
     - Transporter/Hitch  - 325,000 in • lbs.
     - 2-Car Wheel Lift*  - 500,000 in • lbs.
 

 

 

USABLE CAB-TO-AXLE

CARRIER
LENGTH

INBOARD TILT
CYLINDERS

OUTBOARD TILT
CYLINDERS

17.5

N/A

108

18

108

114

19

120

126

20

128

N/A

21

138

N/A

22

148

N/A

 

 

Specifications

Aluminum Body Width 96-3/4 O.D. - 92 I.D.
Steel Body Width 98 O.D. - 92 I.D.
Body Extension 111 inches
Control Valve Sectional, 20 GPM, 1700 PSI
Oil Reservoir 12 gallons
Oil Filter 250 PSI, 25 GPM, 10 Microns
Pump 18 GPM
Body Rating* 10,000 lbs. evenly distributed
Hitch Rating* 2,500 lbs. extended
Wheel Lift Rating* 3,000 lbs. extended
** Load ratings are based on structural factors - not chassis capability.

 

 

King Automotive & Industrial Equipment

4902-A 16th Ave. So.
Tampa, FL 33619, USA

Tel 813-620-9151
Fax 813-247-5536

Toll Free 888-668-KING