Standard Equipment

• Aluminum or Steel Body

• Aluminum Body:
- High tensile double-box extruded floor system
- Heavy duty extruded sill with integral full length graphite-impregnated wear strips
  top and bottom
- Front left and right chain trays
- 9 inch extruded double-box sides
- Front and rear sill reinforcements
- Heavy duty approach plate
- 6 chain locks
- Smooth floor

• Steel Body:
- Front left and right chain trays
- 3/16 smooth floor or 3/16 diamond tread
- 4 x 2 structural tube crossmembers 12 inches on center
- Heavy duty approach plate with four chain locks
- Raised reinforced steel side
- 6 chain locks

• Full length reinforced rail subframe
• Fully hydraulic hitch or wheel lift
• Illuminated dual controls
• Body lock
• Four side body marker lights
• Federal standard 108 shock mounted lighting
• Tow light plug
• Water resistant junction box for wire harness connection
• Lubrication fittings on all pivot points
• 8,000 lb. hydraulic winch with 3/8 x 50 ft. cable
• Pilot operated holding valves on tilting and lifting functions
• Mechanical anti-tilt
• Backup alarm
• Winch free-wheel extension handle
• Cable tensioner
• Cable roller guide
• Safety chains

** Production date October 2001 for aluminum body

Optional Equipment

• Aluminum or Steel Body:
- Additional chain locks
- All steel or aluminum trimmed cab protectors
- Hydraulic planetary winch - 9,000 or 12,000 lbs.
- 8 cu. ft. water resistant aluminum tool box with shelf
- 4 cu. ft. aluminum tool box with shelf
- Factory installation
- Direct mount pump/PTO
- BackSaver wheel lift
- Mudflaps
- Hydraulic rear stabilizer

• Steel Body Only:
- 1/4 smooth or deck plate
- 5/4 Apitong wood floor
- Floor level sides with stake pockets
- Floor level sides with outer rub rail
- Open rail sides
- Open rail removable sides
- 4 x 2 structural tube crossmembers - 8 inches on center
- 102 inch wide body

Note:  some option selections may not be compatible in certain configurations.

Chassis Recommendations

• Minimum GVWR - 23,000 lbs.
• Maximum GVWR - 33,000 lbs.
• Accessible PTO opening
• Maximum frame height - 42 inches
• Minimum frame height - 36 inches
 

CARRIER
LENGTH

MINIMUM FRAME RBM
(EACH RAIL)

19-20

620,000 in. • lbs.

21-22

800,000 in. • lbs.

23-25

1,200,000 in. • lbs.

26

1,800,000 in. • lbs.

CARRIER
LENGTH

USABLE CAB-TO-AXLE

19

120-124

20

124-128

21

136-140

22

146-150

23

156-160

24

162-166

25

174-178

26

180-184