Welcome to King Automotive & Industrial Online

Tampa, Florida, U.S.A.              Phone# 813-620-9151

Toll Free 888-668-KING

 

King Home Page Used Equipment Products

Parts & Accessories Add-On Wheel Lifts Location / Directions

Contact Us Credit Application

King Specials

 
 
  Series 10
 
 

Series 20 Carrier

   
   Features & Options

     Back to Products

 

 

 

 

 

Standard Equipment


• Aluminum or Steel Body

• Aluminum Body:
- High tensile 4 inch double-box extruded floor system
- Heavy duty extruded sill with integral full length graphite- impregnated wear strips top and bottom
- Front left and right chain trays
- 9 inch extruded double-box sides
- Front and rear sill reinforcements
- Heavy duty approach plate
- 6 chain locks
- smooth floor

• Steel Body:
- 3/16 smooth floor
- 4 x 2 structural tube crossmembers 12 inches on center
- Raised reinforced steel side rails
- 6 chain locks
- Full length body slide pads

• Full length reinforced rail subframe
• Fully hydraulic hitch or wheel lift
• Illuminated dual controls
• Body lock
• Mudflaps
• Federal standard 108 shock mounted lighting
• Tow light plug
• Water resistant junction box for wire harness connection
• Lubrication fittings on all pivot points
• 8,000 lb. hydraulic winch with 3/8 x 50 ft. cable
• Pilot operated holding valves on tilting and lifting functions
• Mechanical anti-tilt
• Backup alarm
• Cable roller guide/tensioner (8,000 lb. winch only)
• Winch free wheel extension (8,000 lb. winch only)
• Releasable L-arms
• Safety Chains

 

Optional Equipment


• Aluminum or Steel body
- Additional chain locks
- All steel or aluminium trimmed cab protectors
- Hydraulic planetary winch - 9,000 lbs.
- 8 cu. ft. water resistant aluminium tool box
- 4 cu. ft. aluminum tool box with shelf
- Factory installation
- Direct mount pump/PTO
- BackSaver wheel lift

• Steel Bodies Only
- 5, 6, 7.5 and 10 ton winches
- 3/16 deck plate
- 1/4 smooth or deck plate
- 5/4 Apitong wood floor
- Floor level sides with stake pockets
- Floor level sides with rub rails
- Open rail sides
- Open rail removable sides
- 4 x 2 structural tube crossmembers - 8 inches on center
- 102 inch wide body

Note: Some option selections may not be compatible in certain configurations.
 

 

Accessories

• Bar light
• Work lights
• Switch panel
• Magnetic tow lights
• J-hook chains
• Front hookup chain
• Trailer hitch

 

 

Chassis Recommendations


• Minimum GVWR - 23,000 lbs.
• Maximum GVWR - 33,000 lbs.
• Accessible PTO opening
• Maximum frame height - 42 inches
• Minimum frame height - 38 inches
 

 

CARRIER
LENGTH

MINIMUM FRAME RBM
(EACH RAIL)

19 - 20

620,000 in. • lbs.

21 - 22

800,000 in. • lbs.

23 - 25

1,200,000 in. • lbs.

26 - 28

1,800,000 in. • lbs.

29 - 30

2,100,000 in. • lbs.

 

 

USABLE CAB-TO-AXLE

CARRIER
LENGTH

WITHOUT
CAB CARRIER

WITH
CAB CARRIER

19

120 - 124

124 - 128

20

124 - 128

128 - 132

21

136 - 140

140 - 144

22

146 - 150

150 - 154

23

156 - 160

160 - 164

24

162 - 166

164 - 170

25

174 - 178

178 - 182

26

180 - 184

184 - 188

27

184 - 192

188 - 196

28

192 - 196

196 - 202

29

202 - 208

202 - 208

30

208 - 212

208 - 212

 Chevron 3 and 4-car carriers should be mounted on chassis with low profile cabs and a minimum FAWR 12,000 lbs. for the cab carrier
 

Specifications

Steel Body Width 92 I.D. x 98 O.D.
Aluminum Body Width 92 I.D. x 96-3/4 O.D.
Body Extension 117 inches
Hitch Reach 41 inches
Wheel Lift Reach 64 inches
Control Valve Sectional, 20 GPM, 1700 PSI
Oil Reservoir
 
12 gallons (low mount winch)
24 gallons (upright winch)
Oil Filter 250 PSI, 10 Microns
Pump 18 or 28 GPM
Winch
 
4, 5, 6 ton (low mount)
7.5 and 10 ton (upright)
Body Rating* 20,000 lbs. evenly distributed
Hitch Rating* 3,500 lbs. extended
Wheel Lift Rating* 4,000 lbs. extended
Cab Carrier Rating* 5,000 lbs. evenly distributed
Minimum Load Angle** 13 degrees at 35 inch frame height
* Load ratings are based on structural factors - not chassis capability.
** Load angle varies with frame height and carrier length. Lower frames and longer carriers will produce lower angles.

 

 

King Automotive & Industrial Equipment

4902-A 16th Ave. So.
Tampa, FL 33619, USA

Tel 813-620-9151
Fax 813-247-5536

Toll Free 888-668-KING