Standard Equipment

• Body
  - 1/4 smooth floor plate (steel floor)
  - 5 x 2 structural tube crossmembers on 8 inch centers
  - Floor level sides with stake pockets
  - Heavy duty approach plate with 4 chain lock

• Full length subframe
• Fixed position stabilizer
• Illuminated dual controls
• 15,000 lb. hydraulic winch with 9/16 x 100 ft. cable
• Body lock
• Mudflaps
• Federal standard 108 shock mounted lighting
• Four side marker lights
• Water resistant junction box for wire harness connection
• Lubrication fittings on all pivot points

Optional Equipment

• 3/16 or 1/4 diamond tread floor
• 5/4 Apitong (wood floor)
• Steel floor overlay on wood (not recommended)
• Additional chain locks
• Hydraulic rear stabilizer
• 20,000 lb. hydraulic winch with 5/8 x 100 ft. cable
• 30,000 lb. hydraulic winch with 11/16 x 100 ft. cable
• 8 cu. ft. water resistant aluminum tool box
• 4 cu. ft. aluminum tool box
• Factory installation
• Direct mount pump/PTO
 

Accessories

 • Bar light
• Work lights
• Switch panel
• Hydraulic throttle
• Wire control throttle
• J-hook chains
• Front hook-up chain

Chassis Recommendations

• Minimum GVWR - 50,000 lbs.*
• Accessible PTO opening
• Maximum frame height - 44 inches
• Minimum frame RBM each rail - 3,000,000 in • lbs.

* Load ratings are based on structural factors - not chassis cabability.

USABLE CAB-TO-BOGIE

CARRIER
LENGTH

INBOARD TILT
CYLINDERS

23
24
25

138 - 144
144 - 158
156 - 168

26
27
28

168 - 180
180 - 190
190 - 196