|
 |
|
|
|
Welcome to
King Automotive & Industrial Online |
|
Tampa, Florida, U.S.A.
Phone# 813-620-9151 |
|
Toll Free 888-668-KING |
|
|
|
|
|
|
|
|
|
 |
|
|
| |
Independent tilt provides the operator
with 8° tilt above and 8° tilt below
horizontal for easier hook-up and
increased vehicle clearance.
The three stage, fully hydraulic
underlift has a maximum reach of 112" to
provide for quick and easy underlift
hook-ups on even the most difficult of
vehicles to tow.
The SD 12000 retracts to 42" from the
tailboard to permit use of the truck
hitch.
|
|
|
HOLMES SD
12000 ADD-ON UNDERLIFT - SPECIFICATIONS |
Lift Capacity Extended with Lift
Forks
Retracted with
Lift Forks |
12,000 lbs.
25,000 lbs. |
|
Tow Capacity |
84,000 lbs. |
|
Extended Distance from Tailboard to C.L.
of Fork |
112" |
|
Power |
Unit comes Standard with
Hydraulic
Valve and Hand held Remote
Control.
Unit does not include necessary
hydraulic
fittings or hoses to connect to
existing
hydraulic system. Optional
hydraulic kit
for installation on mechanical
wrecker is
available. |
|
Tilt |
Hydraulic Independent Power Tilt |
|
Lift Attachments |
3 Pair of Lift Forks
(3" Short, Medium, Tall)
1 Pair Fork Adapter |
|
Shipping Weight |
2,650 lbs. approx. |
|
HOLMES SD
12000 ADD-ON UNDERLIFT - UNDERLIFT
GEOMETRY |
|
 |
|
Underlift Retracted . . . . . . . . . .
. . . . . . . . . . . . . A = 42" |
|
Underlift Extended to C.L. of Fork . . .
. . . . . . . . A = 112" |
|
HOLMES SD
12000 ADD-ON UNDERLIFT - CHASSIS
RECOMMENDATIONS |
|
Holmes SD 12000 units
are designed for use on most chassis
having a minimum 240 inch wheel base and
rated at 58,000 lbs. GVWR. Chassis
size, weight and rating may limit actual
loads that can be lifted and towed.
This is especially true of add-on
installations where chassis ratings are
less than those listed. Chassis with
higher ratings allow increased
payloads. Chassis should have minimum
RBM of 2,500,000 inch-pounds, each frame
rail. To achieve maximum performance
the recommended minimum front GAWR is
14,000 lbs. and the recommended minimum
rear GAWR is 44,000 lbs. |
Note: Specifications subject to
change without notice. All ratings
specified are based on structural
factors only, not vehicle capacities
or capabilities
|
|
|
|
|
King Automotive & Industrial
Equipment |
|
4902-A
16th Ave. So.
Tampa, FL
33619, USA
|
Tel
813-620-9151
Fax
813-247-5536
|
|
Toll Free 888-668-KING |
|
|
|
|
|
|
